DMX Splitters Theatrelight's DMX splitters amplify, reshape and isolate the DMX signal for reliable operation with wide voltage differences between the control panel and the dimmers, and in the noisiest environments. For maximum reliability, the units use gold plated DMX connectors.
|
  |
|
||||||
DMX Receiver Re-introduced by popular demand, Theatrelight’s updated DMX-512 to Analogue receiver allows you to control devices such as 10 volt dimming fluorescent ballasts or older analogue dimmers from any DMX control panel. The receiver is also useful for controlling or switching any other voltage sensitive device from a DMX signal.
|
 |
|
||||||
TL-ED2 Art-Net/ShowNet/sACN to DMX Receiver The TL-ED2 Ethernet to DMX receiver converts broadcast Art-Net, ShowNet, or Streaming ACN DMX-over-Ethernet packets to two DMX 512 outputs. It can be used to drive DMX devices such as LEDs, moving lights, dimmers, smoke machines etc from a control panel or one or more DE2 Art-Net transmitters. A single Mode thumbwheel sets the ED2 to receive either Art-Net, Shownet, or sACN packets, with options of HTP merge, LTP merge, or No merge. Any two of a hundred DMX universes (51,2000 channels) can be received and output to the ED2's two DMX output channels.
|
 |
|
||||||
TL-DE2 DMX to Artnet Transmitter The TL-DE2 DMX to Ethernet transmitter can be used by any DMX control desk to convert its DMX output to drive a CAT5 cable network, from where distributed receivers (such as the TL-ED2) can convert the Ethernet signal back to DMX for driving local DMX devices. The DMX input data is encoded to any one of 100 DMX universes on the Ethernet cable by thumb-wheel switches. Another thumb-wheel selects HTP merge, LTP merge, or No merge, with the option of standard refresh (20ms) or fast refresh (10ms) rates.
|
 |
|
||||||
Meteor F Fluorescent Controller The Meteor F Fluorescent Controller converts DMX-512 signals to 12 variable DC outputs each of 0-10 volts at 100ma. These DMX controlled outputs can be used for dimming large scale fluorescent lighting installations of Osram (or similar make) 10 volt high frequency dimming ballasts, for controlling solid state relays for switching motors etc, or any other suitable devices. When used as a fluorescent lighting controller, each Meteor F controller can typically dim up to 1200 fluorescent fitting (12 circuits each of 100 ballasts at 1ma per ballast) for energy efficient installations in theatre auditoriums, concert halls, museums, and other public areas. The Meteor F Controller is normally supplied fitted inside the Theatrelight Meteor wall mount dimmer, but it can also be supplied to specification in a standalone metal cabinet, in a 19 inch rack mount unit, or as a bare PCB for inclusion in other equipment.
|
|
|
||||||
Spare Parts
|
 |
|
||||||
|
||||||||
|
||||||||
